by All Flex | May 22, 2020 | Case Study
Polyimide Flexible Heater Design Tips Question: Why should you put an aluminum backing on a polyimide heater? There are two main reasons: 1. To improve the life and reliability of the heater. 2. To help retain shape when applied to curved surfaces. (This Tech...
by All Flex | Apr 28, 2020 | Case Study
One of the most common questions our Applications Team receives is, “what is the best way to mate with a flexible printed circuit (FPC) or etched foil heater?” This is a difficult question to answer as every application is unique, because of this some interconnect...
by All Flex | Apr 20, 2020 | Case Study
Northfield, MN. All Flex is excited to announce that former Chief Financial Officer, John Fallon, has become the new President and CEO. John has been serving All Flex in the CFO role for the past two-and-a-half years, demonstrating a high level of commitment to All...
by All Flex | Mar 19, 2020 | Case Study
Application: Using thermal simulations to reduce cost and design to production time. Most often when designing heaters for new applications the designer knows the desired outputs and has created a 3D model of the application. What is usually unknown is the amount of...
by All Flex | Feb 28, 2020 | Blogs
This article is the third and final part of methods for imaging etches resist. The first part discussed screen printing; the second part discussed traditional photo exposing. The third part discusses laser direct imaging (LDI). The basic process sequence for LDI is...
