On this page you can configure and build your own custom heater in the form below. If you are looking for additional options, please contact us here at 612-2308075 or rfq@allflexinc.com .

Build-A-Heater® Flexible Heater Standard Properties

Polyimide Insulation
Maximum thickness over heating element: .010”/0.26MM
Maximum Thickness over lead attachment area: 0.18”/4.5MM
Lead Wire is 12” long, Teflon Insulated, Red in Color AWG24, or larger as required by the current draw
Maximum continuous use temperature of heater is 302F/150C
Resistance tolerance of ±10% is standard
Maximum recommended watt density is 15 watts per square inch.